A question about Upper Deck Allure 22-23

[odjickfan]

Hello,

For those of you who opened a lot of Allure 22-23, did you notice something with the surface of the back of the cards? I opened a blaster, and when giving a close look at the back of cards under a good light, I see very thin horizontal lines going all the width of some cards. Those lines are very thin and look like scratches in the glossy finish of the cards.

There was nothing of big value in this box, so I won't start a claim with UD. But, I'm wondering if it's simply bad luck on my side, or if it's a common issue with this product.

 

[zunato]

I have opened quite a bit of at and I needed to look really hard to find the lines you are talking about. If I just look at the back of the card, I don't see the lines. I need to move the card around to see them.

 

[odjickfan]

I have opened quite a bit of at and I needed to look really hard to find the lines you are talking about. If I just look at the back of the card, I don't see the lines. I need to move the card around to see them.

Is it on only a few of your Allure cards, or on a lot of them?

 

[zunato]

Mainly the base cards. I didn't notice it on the inserts or parallels.

The base cards vary, on some you don't need to twist and turn them and on others you really have to look to see the lines

 

[odjickfan]

Mainly the base cards. I didn't notice it on the inserts or parallels.

The base cards vary, on some you don't need to twist and turn them and on others you really have to look to see the lines

Thank you for sharing how it was for you. It would have been a fun break if it wasn’t of this issue, my bases and hits have these lines in the back.

I had a lot of quality control issues with UD products in the past few years.