Help Needed with Magnetic 1 Touches

[udprospect]

Was hoping for some advice regarding older O-Pee-Chee rc's and magnetic one touches.
Have a few older rc's I wish to protect (Dionne, Sittler, Bossy, etc.) and the 35pt one touches are too small for the older rc's.
Is anyone aware of any slightly larger one touches (for a slightly larger card dimension)?
Any assistance is appreciated.
Take care,
Mike

 

[quincy]

Yeah, they're available in a wide range of stock sizings.

 

[Triple B]

The recessed area is the standard 2.5" x 3.5" (maybe even a touch bigger) but as Steve said above, they come in varying depths for thicker cards. If they don't fit in the 35pt, go for 55pt. If the actual dimensions of the cards are bigger than 2.5" x 3.5", then you might be out of luck.

 

[trekrun]

The recessed area is the standard 2.5" x 3.5" (maybe even a touch bigger) but as Steve said above, they come in varying depths for thicker cards. If they don't fit in the 35pt, go for 55pt. If the actual dimensions of the cards are bigger than 2.5" x 3.5", then you might be out of luck.

I tend to go one size bigger, 55 versus 35 and 75 versus 55 count magnetics especially for autographed cards.
Also I was able to obtain 50 count PRO-Mold magnetic card holders and the recess area is a bit larger and it has worked for undercut cards in the past.
I believe THEY are only available in the USA!