Help me out with this Fractal Matrix Card
- Thread starter Dallaz77
- Start date
burebuyer
Hockey Player Collection Winner,
That Modano is the Y-Axis cut, with a print run of 200.
X-Axis were only cut on the top and bottom and were /400. Y-Axis were cut on all 4 sides and were /200. Z-Axis were cut on all 4 sides, but had a extra distinctive cut on each side as well, and were /100.
Derek
X-Axis were only cut on the top and bottom and were /400. Y-Axis were cut on all 4 sides and were /200. Z-Axis were cut on all 4 sides, but had a extra distinctive cut on each side as well, and were /100.
Derek
sdpdesign
Registered Trader ,
The information above is correct. The fractal matrix set up is confusing but essentially knowing if the die-cut is x, y, or z determines the quantity. The colors (bronze, silver, gold) have no determination on the quantity when it is a die-cut.
X-cut @ 400
Y-cut @ 200
Z-cut @ 100
For non-die cut, the color determines the quantity with the letter secondary…bronze most (x is low @ 1400, y @ 1600, z @ 1700)…silver is mid (x @ 500, y @ 700, z @ 800)…gold are 350 or less with x @ 50, y @ 250, z @ 350.
I pulled a gold z-die cut of Selanne. Thought it was shorter print (/50) for the longest. The tiered systems that they had in the 90’s were crazy.
X-cut @ 400
Y-cut @ 200
Z-cut @ 100
For non-die cut, the color determines the quantity with the letter secondary…bronze most (x is low @ 1400, y @ 1600, z @ 1700)…silver is mid (x @ 500, y @ 700, z @ 800)…gold are 350 or less with x @ 50, y @ 250, z @ 350.
I pulled a gold z-die cut of Selanne. Thought it was shorter print (/50) for the longest. The tiered systems that they had in the 90’s were crazy.
Dallaz77
Verified Trader,
Thanks to both of you for answering! I assumed the numbering from what I had found, I was just thrown off by it not being labeled Y-axis like I've seen on so many others.
