Help me out with this Fractal Matrix Card

[Dallaz77]

So, I assumed every Fractal Matrix Die-Cut was either x-axis or y-axis. On my copy of Modano, there's nothing where it usualy says which it is, just blank.

[/url]img244 by whoknew, on Flickr[/IMG]

 

[burebuyer]

That Modano is the Y-Axis cut, with a print run of 200.

X-Axis were only cut on the top and bottom and were /400. Y-Axis were cut on all 4 sides and were /200. Z-Axis were cut on all 4 sides, but had a extra distinctive cut on each side as well, and were /100.

Derek

 

[sdpdesign]

The information above is correct. The fractal matrix set up is confusing but essentially knowing if the die-cut is x, y, or z determines the quantity. The colors (bronze, silver, gold) have no determination on the quantity when it is a die-cut.

X-cut @ 400
Y-cut @ 200
Z-cut @ 100

For non-die cut, the color determines the quantity with the letter secondary…bronze most (x is low @ 1400, y @ 1600, z @ 1700)…silver is mid (x @ 500, y @ 700, z @ 800)…gold are 350 or less with x @ 50, y @ 250, z @ 350.

I pulled a gold z-die cut of Selanne. Thought it was shorter print (/50) for the longest. The tiered systems that they had in the 90’s were crazy.

 

[Dallaz77]

Thanks to both of you for answering! I assumed the numbering from what I had found, I was just thrown off by it not being labeled Y-axis like I've seen on so many others.