WTB: Sleeves that fit One Touch Holders

[BSG]

Looking for the sleeves/team bags that hold the one touch holders that hold The Cup rookie cards.

Let me know if anyone is selling any please.

Thanks, in advance
BSG

 

[sharkaholic707]

I'm not selling any, but if you search "fun yet team bags" I'm sure you'll find something. They are a brand that sells just what you're looking for.

 

[BSG]

Yeah, Pata26 just sent me a ebay link. Thanks so much Pata!!

 

[BSG]

Just bought them, thanks.

Please ignore this topic now.

 

[austin]

I too would be interested in these. If someone could send me the link that would be greatly appreciated. I am looking for the ones that fit one touches snug, not the ones used to Graded cards.

 

[BSG]

These are the ones I was shown: http://cgi.ebay.com/100-ULTRA-PRO-RESEALABLE-GRADED-CARD-BAGS-SLEEVES_W0QQitemZ260396671743QQcmdZViewItemQQptZUS_SM_Sports_Cards?hash=item3ca0d9e2ff&_trksid=p3286.m20.l1116

 

[austin]

Alright, I have those ones right now, but they don't fit One touches very well as they are designed for Graded cards.

I have a teambag that was given to me in a purchase that fits the magnetic perfectly. Anyways, thanks for your help, if anyone knows where to buy the ones I am talking about please let me know. THanks

 

[blindros88]

I use these for the pro mold one screws to give the same fit as the graded card sleeves on the BGS slabbs. They fit like a glove on the one touches, the flap almost comes down over the back lip of the bag.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200358513679&ssPageName=STRK:MEWNX:IT

 

[austin]

I use these for the pro mold one screws to give the same fit as the graded card sleeves on the BGS slabbs. They fit like a glove on the one touches, the flap almost comes down over the back lip of the bag.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200358513679&ssPageName=STRK:MEWNX:IT

In terms of Width for a One touch, how does it fit? Snug?

 

[blindros88]

Yeah, very. The top flap with the seal barely folds over to meet the bag on the back. The dimensions on the bag are 4 1/4 inches by 3 3/8 inches. I'm not sure what the dimensions on a one touch is, but its close.

 

[chum]

i have these teambags that i put one-touch in.

they are as wide as regular teambags, but longer.

i tried also fitting a PSA graded card in there and it fits perfectly. It's too narrow for BGS holders.

Perhaps this is what you are looking for? there is a little bit of room for the one touch to move left and right, but they are not nearly flappy enough for you to tape those room on the sides up.

also, i don't think there are team-bags that are more narrow than the regular ones. i put my patch top loaders in these taller teambags (the ones that fit PSA graded cards) and they hold up nicely.

also, i looked and unfortunately there are no brand names or anything listed. but note that these teambags would only fit a PSA holder and not BGS. I did a search on e-bay and was unable to find a PSA only teambag.

 

[BSG]

Alright, I have those ones right now, but they don't fit One touches very well as they are designed for Graded cards.

I have a teambag that was given to me in a purchase that fits the magnetic perfectly. Anyways, thanks for your help, if anyone knows where to buy the ones I am talking about please let me know. THanks

Shoot, so these don't work at all or very tightly?

 

[canucksfan77]

Shoot, so these don't work at all or very tightly?

the ones you were quoted will fit fine but they are way too big, aprox 5cm of bag on each side and there way too long, the flap will go half way down the rear of the one touch.

JZ

 

[BSG]

the ones you were quoted will fit fine but they are way too big, aprox 5cm of bag on each side and there way too long, the flap will go half way down the rear of the one touch.

JZ

Ugh, I don't want these.

If anyone has the correct ones, please let me/us know.

 

[blindros88]

Try the BCW ones above. They fit like a glove. If anyone needs a pic I can throw some up in a bit

 

[blindros88]

Here are some scans:

The flap actually sticks to the back of the one touch, the seal does not come down far enough to attach to the bag itself, but it does fit super snug.

 

[BSG]

Thanks for the scan, I like how they are tightly held.